SettingConnection

---

Object Hierarchy:

Description:

Content:

Constants:

• public const string AUTH_RETRIES
• public const string AUTOCONNECT
• public const string AUTOCONNECT_PORTS
• public const string AUTOCONNECT_PRIORITY
• public const int AUTOCONNECT_PRIORITY_DEFAULT
• public const int AUTOCONNECT_PRIORITY_MAX
• public const int AUTOCONNECT_PRIORITY_MIN
• public const string AUTOCONNECT_RETRIES
• public const string AUTOCONNECT_SLAVES
• public const string CONTROLLER
• public const string DNSSEC
• public const string DNS_OVER_TLS
• public const string DOWN_ON_POWEROFF
• public const string GATEWAY_PING_TIMEOUT
• public const string ID
• public const string INTERFACE_NAME
• public const string IP_PING_ADDRESSES
• public const string IP_PING_ADDRESSES_REQUIRE_ALL
• public const string IP_PING_TIMEOUT
• public const string LLDP
• public const string LLMNR
• public const string MASTER
• public const string MDNS
• public const string METERED
• public const string MPTCP_FLAGS
• public const string MUD_URL
• public const string MULTI_CONNECT
• public const string PERMISSIONS
• public const string PORT_TYPE
• public const string READ_ONLY
• public const string SECONDARIES
• public const string SETTING_NAME
• public const string SLAVE_TYPE
• public const string STABLE_ID
• public const string TIMESTAMP
• public const string TYPE
• public const string UUID
• public const string WAIT_ACTIVATION_DELAY
• public const string WAIT_DEVICE_TIMEOUT
• public const string ZONE

Properties:

• public int auth_retries { get; set; }
  The number of retries for the authentication.
• public bool autoconnect { get; set; }
  Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available.
• public int autoconnect_ports { get; set; }
  Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection.
• public int autoconnect_priority { get; set; }
  The autoconnect priority in range -999 to 999.
• public int autoconnect_retries { get; set; }
  The number of times a connection should be tried when autoactivating before giving up.
• public SettingConnectionAutoconnectSlaves autoconnect_slaves { get; set; }
  Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection.
• public string controller { owned get; set; }
  Interface name of the controller device or UUID of the controller connection.
• public int dns_over_tls { get; set; }
  Whether DNSOverTls (dns-over-tls) is enabled for the connection.
• public int dnssec { get; set; }
  Whether DNSSEC (dnssec) is enabled for the connection.
• public int down_on_poweroff { get; set; }
  Whether the connection will be brought down before the system is powered off.
• public uint gateway_ping_timeout { get; set; }
  If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping.
• public string id { owned get; set; }
  A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G".
• public string interface_name { owned get; set; }
  The name of the network interface this connection is bound to.
• public string[] ip_ping_addresses { owned get; set; }
  The property specifies a list of target IP addresses for pinging.
• public int ip_ping_addresses_require_all { get; set; }
  The property determines whether it is sufficient for any ping check to succeed among ip_ping_addresses, or if all ping checks must succeed for ip_ping_addresses.
• public uint ip_ping_timeout { get; set; }
  If greater than zero, delay success of IP addressing until either the specified timeout (in seconds) is reached, or a target IP address replies to a ping.
• public int lldp { get; set; }
  Whether LLDP is enabled for the connection.
• public int llmnr { get; set; }
  Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection.
• public string master { owned get; set; }
  Interface name of the controller device or UUID of the controller connection.
• public int mdns { get; set; }
  Whether mDNS is enabled for the connection.
• public Metered metered { get; set; }
  Whether the connection is metered.
• public uint mptcp_flags { get; set; }
  Whether to configure MPTCP endpoints and the address flags.
• public string mud_url { owned get; set; }
  If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices.
• public int multi_connect { get; set; }
  Specifies whether the profile can be active multiple times at a particular moment.
• public string[] permissions { owned get; set; }
  An array of strings defining what access a given user has to this connection.
• public string port_type { owned get; set; }
  Setting name of the device type of this port's controller connection ( eg, nm_setting_bond_setting_name), or null if this connection is not a port.
• public bool read_only { get; set; }
  false if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or true if the connection is read-only and cannot be modified.
• public string[] secondaries { owned get; set; }
  List of connection UUIDs that should be activated when the base connection itself is activated.
• public string slave_type { owned get; set; }
  Setting name of the device type of this port's controller connection ( eg, nm_setting_bond_setting_name), or null if this connection is not a port.
• public string stable_id { owned get; set; }
  This represents the identity of the connection used for various purposes.
• public uint64 timestamp { get; set; }
  The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated.
• public string type { owned get; set; }
  Base type of the connection.
• public string uuid { owned get; set; }
  A universally unique identifier for the connection, for example generated with libuuid.
• public int wait_activation_delay { get; set; }
  Time in milliseconds to wait for connection to be considered activated.
• public int wait_device_timeout { get; set; }
  Timeout in milliseconds to wait for device at startup.
• public string zone { owned get; set; }
  The trust level of a the connection.

Creation methods:

• public SettingConnection ()
  Creates a new SettingConnection object with default values.

Methods:

• public bool add_ip_ping_address (string address)
  Adds a new IP address string to the ip-ping-addresses.
• public bool add_permission (string ptype, string pitem, string? detail)
  Adds a permission to the connection's permission list.
• public bool add_secondary (string sec_uuid)
  Adds a new secondary connection UUID to the setting.
• public void clear_ip_ping_addresses ()
  Removes all configured ip-ping-addresses.
• public int get_auth_retries ()
  Returns the value contained in the auth_retries property.
• public bool get_autoconnect ()
  Returns the autoconnect property of the connection.
• public Ternary get_autoconnect_ports ()
  Returns the autoconnect_ports property of the connection.
• public int get_autoconnect_priority ()
  Returns the autoconnect_priority property of the connection.
• public int get_autoconnect_retries ()
  Returns the autoconnect_retries property of the connection.
• public SettingConnectionAutoconnectSlaves get_autoconnect_slaves ()
  Returns the autoconnect_slaves property of the connection.
• public unowned string get_connection_type ()
  Returns the type property of the connection.
• public unowned string get_controller ()
  Returns the controller property of the connection.
• public SettingConnectionDnsOverTls get_dns_over_tls ()
• public SettingConnectionDnssec get_dnssec ()
• public SettingConnectionDownOnPoweroff get_down_on_poweroff ()
  Returns the nm_setting_connection_down_on_poweroff property.
• public uint32 get_gateway_ping_timeout ()
• public unowned string get_id ()
  Returns the id property of the connection.
• public unowned string get_interface_name ()
  Returns the interface_name property of the connection.
• public unowned string get_ip_ping_address (uint32 idx)
• public Ternary get_ip_ping_addresses_require_all ()
  Returns the ip_ping_addresses_require_all property of the connection.
• public uint32 get_ip_ping_timeout ()
• public SettingConnectionLldp get_lldp ()
  Returns the lldp property of the connection.
• public SettingConnectionLlmnr get_llmnr ()
• public unowned string get_master ()
  Returns the master property of the connection.
• public SettingConnectionMdns get_mdns ()
• public Metered get_metered ()
• public MptcpFlags get_mptcp_flags ()
• public unowned string get_mud_url ()
  Returns the value contained in the mud_url property.
• public ConnectionMultiConnect get_multi_connect ()
• public uint32 get_num_permissions ()
  Returns the number of entries in the permissions property of this setting.
• public uint32 get_num_secondaries ()
• public bool get_permission (uint32 idx, string out_ptype, string out_pitem, string out_detail)
  Retrieve one of the entries of the permissions property of this setting.
• public unowned string get_port_type ()
  Returns the port_type property of the connection.
• public bool get_read_only ()
  Returns the read_only property of the connection.
• public unowned string get_secondary (uint32 idx)
• public unowned string get_slave_type ()
  Returns the slave_type property of the connection.
• public unowned string get_stable_id ()
  Returns the stable_id property of the connection.
• public uint64 get_timestamp ()
  Returns the timestamp property of the connection.
• public unowned string get_uuid ()
  Returns the uuid property of the connection.
• public int32 get_wait_activation_delay ()
• public int32 get_wait_device_timeout ()
• public unowned string get_zone ()
  Returns the zone property of the connection.
• public bool is_slave_type (string type)
• public bool permissions_user_allowed (string uname)
  Checks whether the given username is allowed to view/access this connection.
• public void remove_ip_ping_address (uint32 idx)
  Removes the IP address at index idx.
• public bool remove_ip_ping_address_by_value (string address)
  Removes the IP address address from ip-ping-addresses.
• public void remove_permission (uint32 idx)
  Removes the permission at index idx from the connection.
• public bool remove_permission_by_value (string ptype, string pitem, string? detail)
  Removes the permission from the connection.
• public void remove_secondary (uint32 idx)
  Removes the secondary connection UUID at index idx.
• public bool remove_secondary_by_value (string sec_uuid)
  Removes the secondary connection UUID sec_uuid.

Inherited Members: