SettingBridge

---

Object Hierarchy:

Description:

Content:

Constants:

• public const string AGEING_TIME
• public const string FORWARD_DELAY
• public const string GROUP_ADDRESS
• public const string GROUP_FORWARD_MASK
• public const string HELLO_TIME
• public const string MAC_ADDRESS
• public const string MAX_AGE
• public const string MULTICAST_HASH_MAX
• public const string MULTICAST_LAST_MEMBER_COUNT
• public const string MULTICAST_LAST_MEMBER_INTERVAL
• public const string MULTICAST_MEMBERSHIP_INTERVAL
• public const string MULTICAST_QUERIER
• public const string MULTICAST_QUERIER_INTERVAL
• public const string MULTICAST_QUERY_INTERVAL
• public const string MULTICAST_QUERY_RESPONSE_INTERVAL
• public const string MULTICAST_QUERY_USE_IFADDR
• public const string MULTICAST_ROUTER
• public const string MULTICAST_SNOOPING
• public const string MULTICAST_STARTUP_QUERY_COUNT
• public const string MULTICAST_STARTUP_QUERY_INTERVAL
• public const string PORT_HAIRPIN_MODE
• public const string PORT_PATH_COST
• public const string PORT_PRIORITY
• public const string PORT_SETTING_NAME
• public const string PORT_VLANS
• public const string PRIORITY
• public const string SETTING_NAME
• public const string STP
• public const string VLANS
• public const string VLAN_DEFAULT_PVID
• public const string VLAN_FILTERING
• public const string VLAN_PROTOCOL
• public const string VLAN_STATS_ENABLED

Properties:

• public uint ageing_time { get; set; }
  The Ethernet MAC address aging time, in seconds.
• public uint forward_delay { get; set; }
  The Spanning Tree Protocol (STP) forwarding delay, in seconds.
• public string group_address { owned get; set; }
  If specified, The MAC address of the multicast group this bridge uses for STP.
• public uint group_forward_mask { get; set; }
  A mask of group addresses to forward.
• public uint hello_time { get; set; }
  The Spanning Tree Protocol (STP) hello time, in seconds.
• public string mac_address { owned get; set; }
  If specified, the MAC address of bridge.
• public uint max_age { get; set; }
  The Spanning Tree Protocol (STP) maximum message age, in seconds.
• public uint multicast_hash_max { get; set; }
  Set maximum size of multicast hash table (value must be a power of 2).
• public uint multicast_last_member_count { get; set; }
  Set the number of queries the bridge will send before stopping forwarding a multicast group after a "leave" message has been received.
• public uint64 multicast_last_member_interval { get; set; }
  Set interval (in deciseconds) between queries to find remaining members of a group, after a "leave" message is received.
• public uint64 multicast_membership_interval { get; set; }
  Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received.
• public bool multicast_querier { get; set; }
  Enable or disable sending of multicast queries by the bridge.
• public uint64 multicast_querier_interval { get; set; }
  If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries.
• public uint64 multicast_query_interval { get; set; }
  Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase.
• public uint64 multicast_query_response_interval { get; set; }
  Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge.
• public bool multicast_query_use_ifaddr { get; set; }
  If enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used.
• public string multicast_router { owned get; set; }
  Sets bridge's multicast router.
• public bool multicast_snooping { get; set; }
  Controls whether IGMP snooping is enabled for this bridge.
• public uint multicast_startup_query_count { get; set; }
  Set the number of IGMP queries to send during startup phase.
• public uint64 multicast_startup_query_interval { get; set; }
  Sets the time (in deciseconds) between queries sent out at startup to determine membership information.
• public uint priority { get; set; }
  Sets the Spanning Tree Protocol (STP) priority for this bridge.
• public bool stp { get; set; }
  Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.
• public uint vlan_default_pvid { get; set; }
  The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames.
• public bool vlan_filtering { get; set; }
  Control whether VLAN filtering is enabled on the bridge.
• public string vlan_protocol { owned get; set; }
  If specified, the protocol used for VLAN filtering.
• public bool vlan_stats_enabled { get; set; }
  Controls whether per-VLAN stats accounting is enabled.
• public GenericArray<BridgeVlan> vlans { owned get; set; }
  Array of bridge VLAN objects.

Creation methods:

• public SettingBridge ()
  Creates a new SettingBridge object with default values.

Methods:

• public void add_vlan (BridgeVlan vlan)
  Appends a new vlan and associated information to the setting.
• public void clear_vlans ()
  Removes all configured VLANs.
• public uint32 get_ageing_time ()
• public uint16 get_forward_delay ()
• public unowned string get_group_address ()
• public uint16 get_group_forward_mask ()
• public uint16 get_hello_time ()
• public unowned string get_mac_address ()
• public uint16 get_max_age ()
• public uint32 get_multicast_hash_max ()
• public uint32 get_multicast_last_member_count ()
• public uint64 get_multicast_last_member_interval ()
• public uint64 get_multicast_membership_interval ()
• public bool get_multicast_querier ()
• public uint64 get_multicast_querier_interval ()
• public uint64 get_multicast_query_interval ()
• public uint64 get_multicast_query_response_interval ()
• public bool get_multicast_query_use_ifaddr ()
• public unowned string get_multicast_router ()
• public bool get_multicast_snooping ()
• public uint32 get_multicast_startup_query_count ()
• public uint64 get_multicast_startup_query_interval ()
• public uint get_num_vlans ()
• public uint16 get_priority ()
• public bool get_stp ()
• public unowned BridgeVlan get_vlan (uint idx)
• public uint16 get_vlan_default_pvid ()
• public bool get_vlan_filtering ()
• public unowned string get_vlan_protocol ()
• public bool get_vlan_stats_enabled ()
• public void remove_vlan (uint idx)
  Removes the vlan at index idx.
• public bool remove_vlan_by_vid (uint16 vid_start, uint16 vid_end)
  Remove the VLAN with range vid_start to vid_end .

Inherited Members: